Electric Line (Wireline) simulator
Work from the logging unit: rig up and test the PCE, run tools on the conductor cable, correlate depth on GR/CCL, then shoot the guns, log the cement, set the plug or find the free point.
Electric line (E-line, wireline) is an armoured cable with an insulated conductor at its core (here 7/32 in mono). It carries power and signals between the unit and the tool, so you read depth, tension and GR/CCL in real time and fire explosives by address.
The well is the one from the Primary Cementing video: 13 3/8 in and 9 5/8 in casing, then a 7 in liner on a hanger at 6,700 ft. The perforations are in the 7 in liner. Units are ft, psi and lb.
How to use the simulator
- Mode: Demo runs the whole job with voice; Trainee makes you do every step, in order; Pro has no hints, random faults and a score from 100, where a fatal error (such as firing before correlation) sets it to 0, then IWCF-style questions.
- Job: Perforating (select-fire casing gun or through-tubing), CBL/VDL with a pressure pass, E-4 #20 bridge plug with a dump-bailer cap, multi-speed PLT, and pipe recovery by free point.
- Winch: Pick a speed and press RIH or POOH; type a "Stop at" depth for an exact stop. The top strip shows depth, speed, tension, CHT, WHP and grease.
- Tabs: Gauges; Controls (PCE, grease, pressure test, valves, HSE gate and shooting panel); Job (correlation, CBL display, PLT, free point); Setup (toolstring, why each tool, equipment guide).
- Well view: Wellsite, close-up and details: logging truck with drum and cable, crane and sheaves, lubricator on the tree, and the tools downhole.
Open as app Works offline after the first open; installable on your phone.
Safety note: explosives work needs a permit and a qualified specialist. The Safety Key stays out of the unit until the gun is below 200 ft, radio silence applies to conventional detonators, and no gun is fired before depth correlation. Follow your company procedures and the applicable standards.
How each part works
- Logging unit + drumWinch, drum, depth/tension panel and the shooting panel.
- Measuring headTwo encoder wheels (A and B) measure depth; a difference between them shows cable slip.
- Grease injection headTight flowtubes around the cable and grease above WHP hold the well around the moving cable.
- Wireline valve (rams)Closes on the cable when the grease seal is lost, with grease injected between the rams.
- Lubricator + QTSHolds the toolstring above the swab valve; the quick test sub re-tests only the joint opened between runs.
- GR / CCLGR matches the open-hole reference log; the CCL finds collars to put the gun or plug on depth.
- CBL / VDLA transmitter and receivers at 3 ft and 5 ft: amplitude measures bond, VDL shows formation arrivals, the 8-sector map shows channels.
Simplified teaching model: numbers are illustrative but consistent (for example free pipe at 62 mV, estimated free point 6,154 ft). Not a design tool and not a substitute for certified training.
Sources
- SLB Energy Glossary: cement bond log https://glossary.slb.com/terms/c/cement_bond_log
- SLB Energy Glossary: perforating depth control log https://glossary.slb.com/terms/p/perforating_depth_control_log
- SLB Energy Glossary: casing collar locator (CCL) https://glossary.slb.com/terms/c/casing_collar_locator_ccl
- SLB Energy Glossary: weak point https://glossary.slb.com/terms/w/weak_point
- SLB Energy Glossary: radio silence https://glossary.slb.com/Terms/r/radio_silence.aspx
- SLB Energy Glossary: dump bailer https://glossary.slb.com/terms/d/dump_bailer
- SLB Energy Glossary: microannulus https://glossary.slb.com/en/terms/m/microannulus
- SLB Energy Glossary: free-point indicator https://glossary.slb.com/en/terms/f/free-point_indicator
- SLB Energy Glossary: back-off https://glossary.slb.com/en/terms/b/back_off
- SLB Energy Glossary: chemical cutter / jet cutter https://glossary.slb.com/Terms/c/chemical_cutter.aspx
- Baker Hughes E-4 wireline pressure setting assembly (technical unit) https://dam.bakerhughes.com/m/27a254a5a288fc7d/original/E-4_TU.pdf
- IPSF: a review of system safety in wireline perforating https://perforators.org/wp-content/uploads/2017/05/IPSF-17-03-A-REVIEW-OF-SYSTEM-SAFETY-IN-WIRELINE-PERFORATING.pdf
- IADC safety meeting topics: perforating safety https://iadc.org/safety-meeting-topics/perforating-safety/
- Energy Safety Canada DACC IRP 13: Wireline Operations https://www.energysafetycanada.com/sites/default/files/2026-05/DACC%20IRP%2013%20-%20Wireline%20Operations%20-%20Sanctioned_1.pdf
- FET tech bulletin 8: flow tubes and pressure work https://f-e-t.com/wp-content/uploads/2023/12/FET-Quality-Wireline-Tech-Bulletin-8_Flow-Tubes-and-Pressure-Work.pdf
- Hunting perforating systems catalog https://media.huntingplc.com/products-and-services/perforating-and-logging-systems/hunting-perforating-systems-catalog.pdf
- Drilling for Gas: cement bond logs (CBL) https://drillingforgas.com/cementing/evaluation-cementing/cement-evaluation-cement-bond-logs-cbl/
- Drilling for Gas: stuck pipe, free point determination https://drillingforgas.com/drilling/hole-problems/stuck-pipe-free-point-determination/
- IWCF Well Intervention Pressure Control https://www.iwcf.org/