Slickline simulator
Work from the cab: build the toolstring, rig and test the lubricator, then run wire into a live well for drift, gauge, paraffin, SSD, gas-lift and fishing jobs, with live weight and depth.
Slickline is a thin solid wire (typically 0.108 in) spooled on a drum and run into a live well through a stuffing box, lubricator and BOP without killing the well. It is used for gauge and drift runs, paraffin cutting, SSD shifting, gas-lift valve work and fishing.
In this simulator you are the operator: you review the well data, build the toolstring in the right order, rig the lubricator on the tree and pressure-test it, then drive the drum while you read weight, depth and the tension limit. The physics is simplified but consistent: wire friction and stretch, pressure-area force, jar impact and wire fatigue.
How to use the simulator
- Job: Pick a job such as drift/gauge, paraffin cutter, set a plug in an X nipple, gas-lift valve change, or fishing.
- Mode: Guided mode highlights the next step and explains tool order; free mode lets you try on your own.
- Setup: Confirm the well data, build the toolstring (stems above the jar), rig the lubricator, pressure-test, and open the swab after equalization.
- Drum / weight: Control speed and direction (RIH/POOH), set the tension limit, and watch weight at no-gos, set-down and overpull.
- Fault: Handle a stuffing-box leak, stuck wire or a rope-socket strike with the right response.
- Info: Tap any component to read its function and typical problems.
Open as app Works offline after the first open; installable on your phone.
Safety note: slickline works on a live, pressured well. Never open the swab before a passed lubricator test, never exceed the wire tension limit, and stop at once on a stuffing-box leak. Follow the approved program and your company procedures.
What each part does
- Slickline unit / drumHydraulic drum that sets wire speed, direction and the tension limit.
- Stuffing boxPacking around the moving wire that holds well pressure; its pressure follows WHP.
- Lubricator + BOPPipe above the tree that holds the toolstring, with isolation valves and a pressure test before opening to the well.
- ToolstringRope socket, stems, jar and tools (gauge ring, paraffin cutter, pulling/running tools, etc.).
- Weight / depthWeight and depth readouts are the baseline for spotting no-gos, stuck wire and overpull.
Simplified teaching model: every number and time is illustrative. Not a job-design tool and no substitute for certified training.
Sources
- IWCF Well Intervention Pressure Control (slickline / wireline module) https://www.iwcf.org/
- API RP 17G / wireline pressure-control practices (illustrative reference)
- SLB Energy Glossary: “slickline”, “stuffing box”, “lubricator”, “jar” https://glossary.slb.com/
- Wikipedia: Slickline https://en.wikipedia.org/wiki/Slickline